SPPC Red/Clear LED 3rd Brake Lights For Chevy Silverado : GMC Sierra - Cargp Tail Lamp

65 CUSTOMER REVIEWS
$15.54
  • Fits: 99-06 Chevy Silverado / GMC Sierra
  • Meets or Exceeds DOT & SAE Standards
  • Direct OEM Replacement No Modification Needed
  • New Aftermarket Part
  • 30 Days Money Back Guarantee & 90 Days Limited Warranty
Free shipping over $30.00
Guaranteed ship within 5-7 business days

Compatible With:

  • 1999-2006 Chevy Silverado / GMC Sierra

 

These brake lights are designed to replace the stock lights that adds an improved appearance and safety for the vehicle. Designed to be affordable and enhances the styling of the vehicle to create a different look.  Installation is easy as these lights directly replace the original lights, but we do recommend having them professionally installed.

  • 100% Brand New in Original Packaging
  • High-Quality Brake Lights made by OEM approved manufacturers with materials that meet strict OEM requirements.
  • Unique Brake Lights Style dramatically improves Styling, Appearance & Safety.
  • Professional Installation is Highly Recommended, No instruction included with the package
  • Affordable & Excellent merchandise for enhancing the style of your vehicle & brings out a totally different look to your car.
  • 30 Days Money Back Guarantee & 90 Days Limited Warranty

 

CUSTOMER REVIEWS(65)

Write Review
The Jensens
February 25, 2018
Looks Great... but thats it. Fitment was terrible, the curvature didn’t match the truck at all. Both ends (where screws go) were tight and there was a 3/8 inch gap in the center of the light. Water would have poured in, the seal is about 1/8 thick. So, i liked the way it looked and out came my dremel. After cutting off the backing plate, sanding down the actual red lense i got the gap in the middle to 1/4. Threw some clear silicone in there and the light finally fit the body. LEDs weren’t too bright, but not dim at all, woulda hoped for 25% more light but... Go drive the truck, and BAM sure enough cruise control doesn’t work. (but i saw a resistor) Hmmm investigation time, back out, check wiring, theres a resistor, but its on the cargo light circut, not brake light circut. Bust out the electrical tools and switched it over. So 2.5 hrs later light is in, looks good and everything works. Thought paying the xtra $ would have given me a quality light....
Zachary Job
September 22, 2016
Two stars for the immediate return response for the defective unit through Madness Motorsports. Two units leaked even when silicone was applied between the second unit and the mount. Rain shorted the first after a year. I assumed it was just a bad unit so I ordered another and the same issue happened in months. Waiting on resolution for the second unit, calling the manufacturer about the first now that the second failed.
Ben Knecht
December 24, 2014
Very nice product, much brighter then stock, cruise still works so that good, easy to install. I used silicone around the light cause the seal didn't look the greatest, but overall I like it.
Christine & Sebastian
March 5, 2018
This third light is exactly what I was expecting. It adheres to the OEM look but with modern LED's. The brake light it self is much brighter and the cargo lights are on par with the original. It comes with a thick rubber seal and simple instructions. The blue box is a transformer for the cargo LED,s, It is not a load resistor. I did loose cruise control after installing this, but I had installed LED tail / brake lights beforehand. When there are no incandescent lights in the braking system the computer thinks that the brakes are on all the time, therefore disabling cruise control. Installing one load resistor at the third brake light corrected the problem for me. On the new light I found the Green and Black wires leading to the center brake light and tapped in there, rather than trying to figure out stock wiring. I put the transformer to left side and the load resistor to the right past the point were stock wiring passes into area. Take great care to make sure the load resistor does not touch any wiring or plastic as it gets really hot.
You can find the load resistors here: https://www.amazon.com/gp/product/B00L4V9ECY/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
SuzyQ
April 24, 2018
The claim statement on this light says its compatible with a 1999-2006 Chevrolet Silverado. I ordered it for my 2005. I took it to a Chevy dealer and they reported there was a huge gap across the top of the light where it screws into the cab. Not all our trucks are shaped the same apparently. Some are curved on the roof at the light site and some are more flat. Mine is a 2005 Chevrolet Silverado LS Crew Cab 2 wheel drive FYI. It's a leak waiting to happen at the next car wash or a good rain squall. So this did not fit my truck folks!

The original light was forced loose and the gasket jacked around sideways in a reputable car wash is the reason I'm on a hunt for a new light. So watch out all you folks with old trucks and the car wash. I am paying considerably more money for one the dealer ordered from Napa Auto parts. But if it fits my cab and doesn't leak, therefore not blowing out a brand new amplifier I purchased and had mounted just below and presently have no music, then I guess it's worth it!
Hernan C.
June 20, 2018
This is a very nice light and I like it a lot. The cargo LEDs don’t seem to be crazy bright but better than stock. Sealed great! Fits nice and doesn’t seem like it will leak. Definitely adds a lot to the look. Can’t believe honestly what a difference it makes for the appearance. This is a quality piece. Seems pricey for $50 but it’s a good replacement. I would buy it again for sure.
Bryan
August 5, 2018
I was excited to install this light, everything worked well but I have a major issue with the fitment, it didn’t quite fill the gaps like the factory light, also the gasket is a little small and doesn’t seal very well, I used the water hose to test and it leaked so I used some clear RTV to seal the gaps.
Rolando Nispiros
May 9, 2017
Searched high and low for a good LED third brake light replacement. These are good. Fits well on my 2002 Chevy Silverado 2500HD. Comes with a nice thick gasket. It's slightly bright as far as the brake light. The cargo light part is not as bright as OEM but look way cooler. Matches the color temperature of my other rear facing reverse LED lights.



Recommend Products